Tips & Tricks - Ensuring A Smooth New Shower Unit Installation

Schedule Service

Were you looking for know-how on How to Install a Direct-to-Stud Shower Enclosure?

A successful shower installment needs mindful planning and also a great deal of work. For the most part, you will certainly need to do 3 kinds of jobs: framing wall surfaces, installing the plumbing, as well as ending up walls.

Prep work

Firstly, you need to decide on the sort of shower that you wish to set up. It is important to establish whether the chosen shower is capable of handling certain systems as well as can manage a safe degree of water through the boiler. The majority of shower units nowadays are developed to be adaptable to different water stress (such as saved hot water as well as cool mains).
It is likewise vital to take into account the water pressure as well as the preparation of the piping and drain for the shower

Various Types of Shower Units

Push-on Mixer: The hose pipe and also spray parts of the push-on mixer shower device can be connected to the bathroom faucet as per your requirement, as well as the water temperature level can be adjusted through the faucets. Push-on mixers are cheap and also extremely simple to set up. Nevertheless, although the pipe link is simple, it is easily removed. In addition, it is bothersome to adjust the temperature.

Bath/Shower Mixer: The pipe and also spray of this sort of shower are incorporated with a bath mixer tap, as well as the temperature level can be readjusted via the bathroom taps. It is a very inexpensive choice as well as no additional plumbing is included. Nonetheless, the bath/shower mixers also experience troublesome temperature level control alternatives.

Manual Mixer: The hose pipe as well as spray of a hand-operated mixer shower device are a part of the wall system as well as the cold and hot water products are connected to a solitary shutoff The temperature level and also pressure of the water are controlled with either one or a range of handles (in extra pricey showers). Although temperature control is much easier in manual mixer types, they are a lot more costly than the formerly pointed out mixers. They additionally call for added plumbing of cold and hot water supply pipes.

Thermostatic Mixer: The tube and also spray of this shower kind belong of the wall surface system and the hot and cold water supplies are attached to a solitary shutoff right here too. It is complete with an integrated stabiliser to self-adjust the water temperature and to prevent it from becoming also warm. One of the most significant advantages of a thermostatic mixer shower type consists of practical temperature control. However, it is the most pricey of the various mixer alternatives.

Power Shower: A power shower is a single unit containing an effective electric pump that is capable of modifying both the water stress as well as temperature. This type of shower can be fitted if there is water from a cold water cistern and a warm water cyndrical tube. A power shower makes the adjustment of both stress as well as temperature very easy. On the other hand, it disagrees for water heated straight by the shower or where the water is supplied by a combination central heating boiler under keys pressure.

Electric Shower: An electrical shower is plumbed right into a mains cold water supply and also it heats up the water electrically. It is essential to keep in mind that for this shower kind to be installed, the keys pressure needs to be at the very least 0.7 kg/sq cm (10lb/sq in). The unit enables the temperature and also pressure to be adjusted by means of a knob. Versions with temperature stabilisers are much better as they stay unaffected by various other taps in other places in use within the house. A major downside of electrical showers is that the control knob only enables the option of heats at less stress, or lower temperature levels at a greater stress. This is problematic in the winter when the spray is frequently weak and also the mains water is cooler. However, this issue is tackled in some designs which are available with a winter/summer setting.

Approach

Depending upon the sort of shower you wish to mount, the shower head must either be suited order to avoid its contact with the water in the bath listed below or the base tray, or it should have a check shutoff.
Before beginning, it is advisable to mark the placements of the shower head and control, as well as to intend the pipe-work involved. In addition, the drainage system to eliminate the drainage will need to be intended. Both positions of the cable television course and the shower switch will certainly also need to be taken into consideration if an instantaneous or electric shower system is being mounted.
Use the direction overview given with the shower unit to fit the shower control.Before fitting the pipelines that will provide the water to the shower system, it is important to cut off the supply of water. In order to secure the pipelines, they ought to be offered a waterproof covering and additionally fitted with isolating valves. The pipelines can after that be buried right into the wall surface and glued over to neaten the total look.
Fit the base tray, shower head, as well as installations.
Attach the main shower control to the pipelines that will certainly be supplying the water (This may need a women screw thread adapter).
Reconnect the supply of water and also examination the pipes for any type of leakages, as some might need tightening up.
If you are setting up an electric shower, remember to switch off the electrical energy supply prior to making any electrical connections. Once these connections have been made (there ought to be assistance within the user's manual), the power supply can be changed back on.

Changing Water Pressure to Suit Your Shower

The cold water reservoir can be lifted to a greater elevation (sometimes as little as 150mm (6inches)) by fitting a solid wood assistance under it - perhaps made up of struts and also blockboards. If you pick this alternative, the major and also distribution pipes will certainly additionally need to be increased to satisfy the new height of the reservoir.
Alternatively, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever type is chosen, it must be attached right into the power supply in order to run.

Piping as well as Drainage

It is best to use 15mm diameter supply pipelines, and also make the go to the shower as short as well as straight as possible so as to keep optimal stress as well as minimise heat loss. In addition, by minimising the use of joints for pipeline corners, you can decrease the resistance in the flow of the water. You can attain this by flexing the pipes instead.

The Majority Of Usual Errors

Breaking or overlooking neighborhood code limitations.

Using pipelines that are as well small.

Affixing copper to galvanized without utilizing a brass or dielectric fitting in between both.

Not utilizing tape or pipe substance at threaded joints.

Not leveling your fixtures when mounting them.

Not setting up an air gap loading for components.

Cutting supply stub outs also brief to install the shutoff valves onto after the ended up wall surface is in area.

Not appropriately aligning tubes into installations or quit valves. (Compeling the nut onto the compression ring at an angle when the tubing is at an angle will certainly cause a leakage.).

When turning the water back on in your home, constantly run the outside tube valve or purge your bathrooms to bleed dirt and air from the lines. This particles can cause troubles in your sink faucets and also other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

I am very involved in How to Install a One-Piece Shower Unit and I really hope you enjoyed the blog posting. Sharing is caring. You won't know, you may just be doing someone a favor. We treasure reading our article about How to Install a Freestand.

Phone